New model computers are introduced in Santa Clarita California daily. You may love a certain brand and purchase it. But if you forget or be careless about repairing and maintaining them then you will face various technical problems.
Computers are machines made of electronic parts. It’s a machine which includes both software and hardware. If there isn’t proper maintenance your computer will fail to operate and you may end up with data loss and other critical errors.
If you need best computer repair and maintenance services in Santa Clarita , DataMetrics™ is at your service. We are world’s best technicians. We provide unlimited tech support. DataMetrics™ guarantees you an outstanding experience. Register with us as a customer and we will show you the true essence of remote computer support.
HDTV For the UnGeek
A laptop is essential for students and working individuals. Because of its portability, users can write important papers, connect to the Internet via wireless modems, and can even watch movies anytime and anywhere. But without proper care, this machine can break down, and especially, there can be problems with the LCD monitor. Here are some tips that can help you in troubleshooting your laptop's LCD monitor.
Is there something wrong with your screen? If this is so, then there is a possibility that the LCD (liquid crystal display) backlight of your laptop is broken. The LCD backlight is the source of light that gives you a clearer visual of your screen. Symptoms of LCD damage include:
- Dim laptop LCD
- Flickering screen
- Faint images on your LCD
- No video image
- Faded laptop LCD
A laptop backlight is composed of four parts and these are:
- Laptop inverter
- LCD lamp
- Inverter cable
- Toggle switch
Damage to any of these parts may result to the symptoms stated above. Unfortunately, there is no other way to be sure if one of these parts are damaged without using a tester. Some of the main causes of damage to these parts include age and excessive use of your laptop. Parts such as the LCD lamp usually last for two years minimum.
Aside from the blacklight, it is possible that your LCD screen itself is damaged. This problem can be very serious because the LCD is the most fragile and expensive part of your laptop. Symptoms of LCD damage include:
- Decolorization of your screen
- Appearance of stripes or lines on your screen
LCD damage is usually caused by hard impacts to your laptop. Remember, the LCD is a very sensitive and fragile piece of equipment. Even the slightest amount of pressure on your LCD can cause it to break.
The only way to repair the backlight and the LCD monitor is to replace them. Replacing the LCD monitor alone can cost you around $250 and that is apart from the $120 service fee that most laptop repair companies charge.
HDTV For the UnGeek
The cyber-world is full of threats such as viruses, spyware, Trojans, Worms and etc. These can affect your PC and even steal your personal information. These cyber-threats can cause huge dilemmas to your PC. Always have an anti-virus guard installed. Upgrade the program and schedule regular updates. Your software’s database should be updated for a full-protection.
Laptop Repair In Santa Clarita California
"Should I buy a new printer or fix the old one?" I don't know how many times I've heard this question, but I wish I had a nickel for each time. Of course, if they asked a salesperson, he'd have a ready answer for them... always "yes". But as a technician, I like to analyze the question a little before giving an answer. The standard equation was always that if the repair costs more than half the machine, then replace it. But as printer technology advances, and smaller printers last longer, that standard is changing.
Just to give you an example, a $1,000 laser printer might easily last 150,000 pages before ever breaking down. When it finally does need repairs, a $500 maintenance kit (including labor) is nothing to wince at. It's standard almost. And the $500 will most probably carry you through another 150,000 pages. In a case like that, if you'd replaced that printer, you would have wasted $500.
So once we get down to the dollar for dollar, the modern equation has changed, even though the standard answer from printer dealers hasn't.
Of course, the question of repair cost and printer cost isn't the only thing to consider anymore. You have to consider down time, technological advances, and a whole mess of other things. In the end, you won't get a short, simple answer... but you can make a list of pros and cons taking into account each of the following:
Small Consistent Repairs - If a machine breaks down every other month, it's probably time for an upgrade... even if the repairs are cheap. They aren't supposed to break often. If yours is, then either the parts are getting old and brittle, or the machine itself isn't made for the amount of work you're giving it. An acceptable 'break free' period is four months.
Parts - With smaller machines, parts availability is usually the deciding factor when trying to decide whether to replace or repair. Especially with inkjet printers. As a matter of fact, the odds of being able repair an inkjet machine is very slim, because inkjet parts are usually not manufactured--the machine was designed to be replaceable.
Down Time - Sometimes it's not the end of the world when a machine sits in the corner for a week waiting for parts. Sometimes it is the end of the world. If your business relies on your machine, then you need to consider a few things: 1-Is the machine reliable enough to go for long periods without breaking? 2-Is the machine a popular model, and are there parts readily available when the machine DOES break? 3-do you have anything for 'backup'? If you answered 'no' to any of these questions, you ought to think about buying a good, reliable, POPULAR machine.
Technology - Hey--it changes, and it changes fast. If you're still using something with a parallel port, then it might be time to switch over. Yes, they'll always have things to help you convert from USB to parallel, but there are other software and memory changes that might make it impossible to use old printers. If you're thinking about upgrading your computer systems in the next couple of years, you ought to upgrade your printer as well.
Supplies - It's really hard to let go of an old printer when you have a whole stack of unused toner cartridges. Especially if you can't sell them to recover some of your cost. If the printer is costing too much to repair, then you end up spending a dime to save a nickel. However, some of the 'old reliables' can be used for bulk printer or for back-up printers, so it's not always a total loss.
While these are all good things to consider when paying for a printer repair, sometimes the final decision comes down to a simple budget consideration. The most important question might simply be: Do we have enough money budgeted for a new printer? Your technician can't help you answer that, but his experience can usually help you foresee the price you'll pay if you hold on to your old machine.